How to Look Sharp in a Suit: Nine Things That Work
A suit looks its cleanest when the jacket fits at the shoulders, buttons at your narrowest point and runs in one dark, plain colour from collar to shoe. Most of the effect comes from fit and proportion, not from tricks. The nine points below are the ones tailors and menswear writers agree on, plus one popular rule that the research doesn't fully support.
None of this changes your body. It changes the lines a viewer's eye follows.
On this page
- 1. Fit the shoulders first
- 2. Choose a jacket that covers the seat
- 3. Button at your narrowest point
- 4. Single-breasted is the safer choice
- 5. Dark, plain, matte cloth, and the truth about stripes
- 6. Trousers at the natural waist, with little or no break
- 7. A shirt that fits, not one that strains
- 8. Keep the pockets flat and empty
- 9. A smooth layer underneath
- What a suit can't do
- Quick answers
- Where UNDR fits
1. Fit the shoulders first
The shoulders are the first thing to get right, because a tailor can barely change them. Buy the jacket that fits your shoulders, then have the waist and sleeves adjusted.
Proper Cloth's shoulder fit guide says the seam should end "slightly past your shoulder bones without pushing past the top of the arm." There should be no divots, pulling or dents at the top of the sleeve.
Why it matters for a clean line: if you size the jacket up to close around the midsection, the shoulders come with it. They overhang, the sleeves droop and the whole jacket reads as a box. Sven Raphael Schneider of Gentleman's Gazette explains what a tailor can and can't do: reshaping a jacket shoulder "involves major surgery," and he doesn't recommend it. Taking in the waist, by contrast, is routine.
2. Choose a jacket that covers the seat
A jacket that is too short cuts you in half at the widest point of the hips. A jacket that is too long shortens your legs. The safe target is a jacket that covers most of your seat.
Black Lapel, a custom suit maker, gives two checks in its jacket length guide. The "seat rule": at least ¾ of the seat of your trousers should be covered. The "rule of thumb": with your arms relaxed, the hem should graze your lower thumb knuckle. It adds that jacket length can vary about ¼ inch either way, and that the seat rule works better for men whose arms are long or short for their height.
3. Button at your narrowest point
The fastened button sets where the eye reads your waist. If it sits at the narrowest part of your torso, the jacket draws a clean V from the shoulders down.
The London tailor King & Allen puts it simply in a 2018 guide: fasten the jacket at the narrowest part of your waist, because that is where it draws the cleanest outline.
The menswear writer Alan Flusser frames the same idea as proportion. In Dressing the Man (2001), quoted by Parisian Gentleman: "The placement of the coat's waist button should divide the body so that the torso and legs appear at maximum length."
A slightly lower button stance makes a longer V, which lengthens the torso. A higher stance can make a fuller midsection seem to balloon out below the button, the same article notes. If you are unsure, button the jacket in front of a mirror and look at where the V ends. It should end at your waist, not at your chest.
Always button the jacket when you stand. Open, the two front panels hang apart and frame the widest part of the shirt.
4. Single-breasted is the safer choice
A single-breasted jacket with one or two buttons is the easiest cut for a clean, long line. A double-breasted jacket can work, but it is less forgiving.
King & Allen recommends a one- or two-button single-breasted jacket for the cleanest line. Christian Barker, writing in The Rake in 2022, also calls the two-button single-breasted coat the safer choice for a bigger man. If you want a double-breasted suit, he names the 6x1 as the most flattering version: six buttons, fastened on the lowest one, which gives a long, low V.
The reason is simple. A double-breasted front crosses two layers of cloth over the midsection, and it only looks right buttoned. Single-breasted gives you one clean panel and a deeper opening.
5. Dark, plain, matte cloth, and the truth about stripes
Choose navy or charcoal in a plain cloth with a matte finish. That is the most reliable colour advice, and every tailoring source we checked agrees on it. Stripes are a smaller lever than most guides suggest.
King & Allen is clear that dark colours give a sleeker outline, and names navy and charcoal. The Rake adds that plain cloths with a matte finish beat shiny ones, and that large checks make the body appear broader.
Vertical stripes are where the research gets interesting. Tailors recommend pinstripes for length. The Rake: "The vertical lines create a sense of length and draw the eye up and down, rather than across and out."
Vision science says it is not that simple. The Helmholtz illusion, first described in 1867, holds that a square of horizontal lines looks taller and narrower than the same square in vertical lines, as Scientific American explained in 2012. Peter Thompson and Kyriaki Mikellidou of the University of York tested it on clothing in a 2011 study. A horizontally striped shape had to be 4.5% wider than a vertically striped one to look the same width. Their figures were mostly drawings of a dress and a mannequin, not men in suits.
A 2013 follow-up by Ashida and colleagues found the effect was stronger on a thin figure than on a fuller one, possibly reversing for the latter, with large differences between viewers.
The honest takeaway: a fine pinstripe won't hurt and may add a sense of length. It won't do as much as the cut and the colour. If you like stripes, keep them narrow and low-contrast.
6. Trousers at the natural waist, with little or no break
Trousers that sit at your natural waist and fall with a slight break keep the leg line long. Low-rise trousers and pooled fabric at the ankle do the opposite.
Paul Anthony of Bespoke Unit writes in his trouser fit guide that "suit trousers sit at the natural waist, which is right around the navel." With the waistband that high, less shirt shows between trousers and jacket button when you move. King & Allen recommends flat-front trousers at the natural waist. The Rake prefers a slightly roomy pleated trouser for a bigger man. Try both and judge in the mirror.
For the hem, Real Men Real Style's guide to trouser breaks says no break is "the cleanest look," and that "a short break makes a shorter man appear taller." Bespoke Unit says a slight break looks good on most men. A full break, with fabric folding on the shoe, is best left to very tall men.
Keep jacket and trousers in the same cloth. One unbroken column of colour from collar to shoe is the quiet advantage a full suit has over separates.
7. A shirt that fits, not one that strains
The shirt under the jacket should be fitted but never tight. A shirt that strains at the buttons draws attention to exactly the area you want to keep quiet.
Suitsupply's shirt fit guide describes the target as "a clean, smooth placket with no button tension." It also warns that a shirt that is too large "loses all definition and will fit uncomfortably under a jacket." The Rake makes the same point about the suit itself: the fit needs to be precise, not too tight.
Two simple checks. Stand with the jacket off and look for X-shaped creases radiating from the buttons; that shirt is too small. Then pinch the fabric at your sides; if you can pinch several centimetres, it is too big. Our guide on how to stop a dress shirt from puffing covers the second problem in detail.
8. Keep the pockets flat and empty
Anything in your pockets adds width at the hips and chest. Empty them, and choose jackets with inset pockets rather than patch pockets.
King & Allen warns that bulky wallets or phones in the front trouser pockets draw attention to the midsection. The Rake notes that inset pockets are preferable to patch pockets, which "can broaden the hips."
The fix costs nothing. Carry a slim card holder in the inside jacket pocket and leave the outer pockets empty, so the flaps lie flat.
9. A smooth layer underneath
The last layer is the one under the shirt. A close-fitting base layer gives the shirt a smooth surface to lie on, with no folds of loose undershirt and fewer lines showing through. It cannot make a jacket fit that doesn't.
A well-cut jacket still shows what is under it when you sit, reach or turn. A loose cotton undershirt bunches at the waist; a flat layer keeps the surface even.
We've written about this layer before. The quiet architecture of a well-dressed man walks through every layer from skin to jacket. The difference between a suit that holds and one that doesn't looks at how a suit looks at 9am versus 9pm. And how a base layer changes the way a suit sits by hour six covers posture across a long day.
A fair counterpoint: Black Lapel argues in its undershirt guide that tight garments are "no substitute for well-fitted clothing." We agree. Fit the suit first. Then add the layer, in your true size, never a size down for extra hold. If anything feels too tight or affects your breathing, take it off.
What a suit can't do
A suit changes how you are seen, not your size. The effect of good tailoring is real but modest: a cleaner outline, a longer line and fewer distractions. Nobody can promise you a number of kilos or centimetres, and you should be wary of anyone who does.
The order matters: shoulders and length first, then buttoning, colour and trousers, then the small things.
Quick answers
What colour suit gives the cleanest line?
Navy and charcoal, in a plain cloth with a matte finish. Tailoring writers agree that dark colours slim more than light ones, and that large checks and shiny cloth make the body look broader.
Do pinstripes make you look longer?
A little, at most. Tailors say they add length, but lab studies of the Helmholtz illusion found horizontal stripes can look narrower, and the effect varies by figure and viewer. Cut and colour matter more.
Should a bigger man wear a double-breasted suit?
He can, but single-breasted with one or two buttons is the safer choice. If you choose double-breasted, The Rake recommends the 6x1 style, buttoned on the lowest button, and wearing it buttoned.
How long should a suit jacket be?
Long enough to cover at least three-quarters of your seat. A jacket that is too short draws a line across the hips, and one that is too long shortens the legs.
Does wearing something under a suit help?
A close-fitting layer gives the shirt a smoother surface, so the line under the jacket looks cleaner. It doesn't change your size and won't fix a suit that fits badly.
Where UNDR fits
UNDR makes the ninth point: the layer under the shirt. For a suit, we suggest The Core Tank, a compression tank (€43,99). It is sleeveless, so no sleeve line shows under a shirt. It is made from a lightweight 80% nylon blend with flat bonded hems, so it leaves no ridge under a tucked shirt, and it comes in black or white.
Check the size guide on the product page before you order. It sizes by chest first, and if you fall between sizes, size up. If the suit is for a big day, see what to wear under a suit on your wedding day.
UNDR everything.
